www.interceptorid.com

Install Setup : Dual Phone Lines

Install Setup : Dual Phone Lines

 

Dual Phone Lines Setup

To hook-up the Person-To-Person® device on a system with 2 Lines on one outlet connect Person-To-Person® Device as show below. Note one Person-To-Person® device is only able to Control/block one phone line, if you wish to block both lines you must have a 2nd Person-To-Person® Device. Also, note that you will need a line spliter to get any Person-To-Person® Device to funtion. The Line Splitter will have 3 RJ-11 Jacks one labeled L1 , L2 and L1&L2. The one Labeled L1 should be connected to the Line 1 Person-To-Person® devices LINE IN jack. The one Labeled L2 should be connected to the Line 2 Person-To-Person® devices LINE IN jack. The Line Splitter should be connected to the wall jack. Plug the Power Adapter into the wall outlet. Connect your phone into the PHONE Jack on the Person-To-Person® Device. Connect you answering machine into the ANS MACH Jack on the Person-To-Person® Device. If you wish to have blocked calls not go to the answering Machine then leave the ANS MACH Jack on the Person-To-Person® Device empty, and connect the answering machine in the PHONE Jack and connect your phone into the Answering Machine. Note this might require a splitter. Repet this for the 2nd Line.

 

About Us | Site Map | Privacy Policy | Contact Us | ©2006 Marketing Solutions Inc.