www.interceptorid.com

Install Setup : Overall

Install Setup : Overall

 

Overall System Setup

The overall system setup is designed to provide you the best way to implement you Interceptor ID devices in you home. You should connect the Person-To-Person® device to the main phone in the house like the living room or family room. Then connect the remote receivers up to each of the other phones in the house and up to four(4) phones per Person-To-Person® Device. Phones not connected to the Person-To-Person® Device or connected to the Remote Receivers will ring with every incoming call unless you turn there ringers off or connect them to a Remote Receiver. An answering machine should be connected to the Person-To-Person® Device unless you do not want blocked calls to leave a message in this case connect the answering machine to the PHONE Jack of the person-to-pesron device and leave the ANS MACH Jack blank. It is also important to have the right amount of Remote Receivers. Every phone you wish to block/route calls to should be connected to a Person-To-Person® Device or a Remote Receiver with this in mind you should a remote receivers in the bedrooms phone in places that are not needed to ring like more then one phone in a single room should just have its ringer turned off and save the Remote Receiver for another phone in a differen room.

 

About Us | Site Map | Privacy Policy | Contact Us | ©2006 Marketing Solutions Inc.